Sound Blaster 16 MCD ASP & Sound Blaster 16 MCD
CT2230 & CT2239
=======================================================
Selections in [] brackets are factory default settings.
closed=ON (jumper making connection
open=OFF (jumper removed)

IRQ and DMA settings are likely set in software (diagnose.exe).
Interrupt (IRQ):     2  [5]  7  10 
8-bit DMA Channel:   0  [1]  3 
16-bit DMA Channel: [5]  6   7 

JUMPERS:
========

ADDRESS:  [220]    240     260     280
 IOS0      ON      OFF     ON      OFF
 IOS1      ON      ON      OFF     OFF

MPU-401   [Enabled]    Disabled
 MPUEN     closed      open 

MPU address:  [330]    300
 MSEL          closed  open

Joystick: [Enabled]    Disabled
 JYEN      closed      open


Optional settings:
------------------

CSP Chip:       Enabled    Disabled
 IFSD, APSD     open       closed

Mitsumi CD-ROM interface IRQ: 3 10 [11] 
 Mitsumi IRQ:   3      10    [11]
 JP5            OFF    OFF    ON 
 JP6            OFF    ON     OFF
 JP7            ON     OFF    OFF

CDROM Type (lower left corner)
- remove jumper to disable, or close 'disabled'
  jumper if there are pins available for that selection.